Compaction, morula and blastulation
On this page you will learn
- what compaction is and how it begins on Day 4
- how the morula becomes a blastocyst
- the two first cell lines: inner cell mass and trophectoderm
- expansion, collapse and hatching, and how you observe them
Compaction
Around Day 4, at roughly the 8- to 16-cell stage, the blastomeres flatten against one another and their borders become hard to see. This is compaction. It depends on adhesion molecules on the cell surfaces (E-cadherin is the main one) and on the formation of junctions between neighbouring cells.
For the first time, the cells on the outside of the embryo differ from those on the inside: the outer cells become polarised, with a distinct outer face. A fully compacted embryo is called a morula, from the Latin for mulberry.
Compaction is often incomplete. Some cells or fragments may be left out of the compacting mass. These excluded cells usually do not contribute to the blastocyst and may be a way the embryo sets aside abnormal cells. Note them, but do not over-interpret them.
Blastulation
From late Day 4 to Day 5, the outer cells form tight junctions that seal the embryo and begin to pump sodium ions inwards using membrane pumps. Water follows by osmosis, and a fluid-filled cavity appears: the blastocoel. As it grows, the embryo becomes a blastocyst, with two distinct cell populations:
- Trophectoderm (TE): a single layer of flattened cells lining the cavity. It will form the trophoblast, the main cell layer of the placenta. A few TE cells are sampled in embryo biopsy (page 57).
- Inner cell mass (ICM): a compact cluster of cells on one side of the cavity. It will form the fetus, and also the amnion and yolk sac.
This is the first time cells in the embryo take on different fates, and it is why blastocyst grading (page 38) scores the ICM and TE separately.
Expansion and hatching
As fluid keeps entering, the blastocyst expands, the zona stretches and thins, and the embryo grows in overall size for the first time. Eventually the embryo begins to escape through a breach in the zona (hatching) and then leaves it entirely (hatched). In the body this happens in the uterus before implantation. Assisted hatching in the laboratory is covered on page 56.
Blastocysts often collapse partly and re-expand. A single collapse seen at one observation is not by itself a reason for alarm; time-lapse imaging (page 39) shows how common this is.
Timing
The Istanbul consensus gives standard observation times of about 92 hours after insemination for Day 4 and about 116 hours for Day 5. Many embryos reach the blastocyst stage on Day 5; some reach it on Day 6, and a few later.
Your laboratory policy states which days are observed, which embryos continue in culture, and when embryos are vitrified (page 51). Embryos that do not form a blastocyst by the end of culture are recorded and handled according to that policy.
At the bench
- On Day 4, check whether your protocol calls for an observation; many laboratories skip it to leave embryos undisturbed.
- Plan Day 5 observations within the standard window from the insemination times.
- Check the dish identity with your witness.
- Observe each embryo and record its stage: compacting, morula, early blastocyst, blastocyst, expanded, hatching or hatched.
- For blastocysts, look for the ICM and the TE separately; you will grade them using page 38.
- Note excluded cells or fragments, and arrested embryos.
- Return the dish to the incubator promptly, and report the summary to the senior embryologist, who plans transfer or vitrification with the clinician.
Common errors
- Recording a compacting embryo as "arrested" because cell borders cannot be counted.
- Mistaking a large vacuole for an early blastocoel.
- Judging a collapsed blastocyst as poor from one observation.
- Missing the ICM because it sits under or behind the cavity; rotate or refocus.
- Extra observations "just to see", which disturb culture.
Key points
- Compaction begins around Day 4: the cells flatten together, and a fully compacted embryo is a morula.
- The blastocoel forms as the outer cells pump sodium inwards and water follows.
- The inner cell mass forms the fetus; the trophectoderm forms the placenta's main cell layer.
- A blastocyst often collapses and re-expands; do not judge it from one observation.
- Many embryos reach the blastocyst stage on Day 5, some on Day 6.
Check yourself
What happens to cell borders during compaction, and why?
The blastomeres flatten against one another and their borders become hard to see. This depends on adhesion molecules on the cell surfaces, mainly E-cadherin, and on junctions forming between neighbouring cells.
Explain how the blastocoel forms.
The outer cells form tight junctions that seal the embryo and pump sodium ions inwards. Water follows by osmosis, and a fluid-filled cavity, the blastocoel, appears.
What will the inner cell mass and the trophectoderm each become?
The inner cell mass forms the fetus, and also the amnion and yolk sac. The trophectoderm forms the trophoblast, the main cell layer of the placenta.
Why should a single collapsed blastocyst not be over-interpreted?
Blastocysts often collapse partly and re-expand. A single collapse seen at one observation is not by itself a reason for alarm.
From page 35: Why do some embryos that looked good on Day 2 arrest on Day 3?
The embryo's own genes switch on around the 4- to 8-cell stage. Embryos with problems from the oocyte or the culture environment may stop dividing around this point (page 35).
From page 33: Why is a fertilisation check done too late a problem?
The pronuclei may have faded before syngamy, so a normally fertilised oocyte can be recorded as unfertilised (page 33).
Questions on this page
What is a morula?
A compacted embryo, usually on Day 4, in which the cells have flattened together so their borders are hard to see. The name comes from the Latin for mulberry.
Can a blastocyst form on Day 6?
Yes. Many embryos reach the blastocyst stage on Day 5, and some on Day 6. Laboratory policy states how long embryos are cultured and when they are vitrified.
Why do blastocysts sometimes collapse?
Partial collapse and re-expansion are common during blastocyst development. A single collapse seen at one observation is not by itself a sign of a poor embryo.
The Genesis ART Textbook is teaching text for trainees and doctors of the Genesis ART Training Academy. It is not treatment advice and not a laboratory standard operating procedure; every technique is learned under supervision. Page numbers never change.
