Endometrial scanning
Doctors: the full version of this topic is in the Doctors’ Textbook. See page 15, endometrial scanning for doctors, and page 58 on preparing the endometrium for a frozen embryo transfer. Embryologist path: this page is optional reading.
On this page you will learn
- How to measure endometrial thickness correctly
- How the endometrial pattern changes through the cycle
- Which uterine findings matter before IUI, IVF or embryo transfer
- How to record findings so they can be compared
The endometrium in ART
The embryo implants in the endometrium, so every cycle that ends in insemination or transfer includes a look at it. Ultrasound cannot prove that the endometrium is receptive. Yet it can show that it has grown and has the expected pattern for the cycle phase. It can also show that nothing in the cavity is likely to get in the way.
Measuring thickness
Obtain a true mid-sagittal view of the uterus, with the endometrial line running continuously from the fundus to the cervical canal. Measure at the thickest point, perpendicular to the midline, from the outer edge of one layer to the outer edge of the other, so you include both layers.
If there is fluid in the cavity, measure each layer separately and add them, and record the fluid. Repeat if your first image is oblique; an off-axis view overestimates thickness. Use the same technique at every visit so that measurements can be compared across the cycle.
Pattern through the cycle
- Menstrual phase: a thin, bright line, sometimes with blood in the cavity.
- Proliferative phase: the endometrium thickens under oestrogen and develops a "triple-line" pattern: a bright outer line on each side and a central line, with darker tissue between.
- Around ovulation: the triple-line pattern is clearest.
- Secretory phase: after ovulation, progesterone makes the tissue uniformly bright and the triple line fades.
In a frozen embryo transfer cycle (page 41), the endometrium is followed to decide when progesterone is started and so when the transfer will take place. A thin or poorly patterned endometrium is reported to the treating consultant, who decides whether to continue, extend preparation or cancel.
What to look for in the cavity
- Polyps: a bright, oval area within the endometrium, often with a single feeding vessel on colour Doppler. Seen most clearly in the proliferative phase.
- Fibroids: describe their position relative to the cavity. Those that distort or project into the cavity matter most for implantation; those wholly in the outer wall may not.
- Fluid in the cavity: may be associated with a blocked, fluid-filled tube (hydrosalpinx). Report it before any transfer.
- Adhesions and congenital shapes: an irregular or interrupted endometrial line, or a cavity that divides at the fundus. A 3D view, where available, helps; confirmation is by hysteroscopy.
- Adenomyosis: an enlarged, globular uterus with an uneven muscle texture and small cysts.
At the bench: an endometrial scan
On Genesis courses these scans are watched only: no trainee scans a patient, in keeping with the PCPNDT Act. The steps below describe what you see the clinician do.
- Check identity and cycle day; consent and a chaperone, as on page 64.
- Find the mid-sagittal plane and freeze an image only when the line is continuous.
- Measure double-layer thickness at the widest point. Take two measurements and record the larger only if both are true sagittal views.
- Describe the pattern: triple-line, intermediate or uniformly bright.
- Turn to the transverse plane and sweep from cervix to fundus to look for lesions.
- Use colour Doppler on any focal lesion.
- Record thickness, pattern, any fluid and any lesion with its size and position, and save representative images.
Common errors
- Measuring in an oblique plane
- Measuring one layer only, or including fluid in the thickness
- Calling a polyp from a single image without a transverse sweep
- Missing cavity fluid before transfer
- Writing "normal" without a thickness and pattern
Key points
- Measure thickness in a true mid-sagittal view, at the thickest point, including both layers.
- If there is fluid in the cavity, measure each layer separately, add them and record the fluid.
- The triple-line pattern develops in the proliferative phase and is clearest around ovulation.
- Fibroids that distort or project into the cavity matter most for implantation.
- Report cavity fluid before any transfer, and never write "normal" without a thickness and pattern.
Check yourself
Describe how to measure endometrial thickness when there is fluid in the cavity.
In a true mid-sagittal view, measure each layer separately at the thickest point and add them. Do not include the fluid in the thickness, but record it.
What does a triple-line pattern indicate about the cycle phase?
The proliferative phase, when the endometrium thickens under oestrogen. The pattern is clearest around ovulation and fades after ovulation, when progesterone makes the tissue uniformly bright.
Which fibroids matter most for implantation, and why?
Those that distort or project into the cavity, because the embryo implants in the endometrium lining the cavity. Fibroids wholly in the outer wall may not matter.
Why should cavity fluid be reported before an embryo transfer?
Fluid in the cavity may be associated with a blocked, fluid-filled tube (hydrosalpinx). It is reported before any transfer.
From page 64: How fast does a dominant follicle usually grow, and at what size is it usually considered mature?
Roughly 1 to 2 mm a day. A lead follicle of about 18 to 20 mm, with a suitable endometrium, is usually considered mature (page 64).
From page 41: Why is elective single embryo transfer the default?
Transferring more than one embryo increases the chance of twins or more. A multiple pregnancy carries higher risks for the mother and for the babies (page 41).
Questions on this page
Does a thick endometrium mean implantation will happen?
No. Ultrasound shows growth and pattern and can find lesions, but it cannot prove the lining is receptive.
When are polyps easiest to see?
In the proliferative phase, when the surrounding endometrium is less bright, and with colour Doppler showing a feeding vessel.
Who decides what to do about a thin lining?
The treating consultant, after the scan findings are reported.
The Genesis ART Textbook is teaching text for trainees and doctors of the Genesis ART Training Academy. It is not treatment advice and not a laboratory standard operating procedure; every technique is learned under supervision. Page numbers never change.
