IVF centre in Goa
Consultations in Panjim · Margao · Mapusa · Vasco
Call
Page 34 of 72Embryologist path · Lab Textbook
Part 2: The IVF laboratory, oocytes and ICSI · Day 6
Page 34 of 72

Common ICSI errors

On this page you will learn

Why a page on errors

Every embryologist makes errors while learning ICSI. What matters is that they are made under supervision, recognised, recorded and not repeated. This page gathers the errors mentioned on pages 28 to 33 into five groups. When something goes wrong, work through the groups in order: the cause is often earlier than the moment you noticed it.

1. Set-up and environment

2. Tools

3. Sperm

4. Oocyte

5. Records and process

Recognising the pattern

Patterns tell you where to look. Many degenerated oocytes after injection point to group 2 or group 4: tool angle, suction or withdrawal. Good-looking oocytes that do not fertilise, with sperm visible inside, point to group 3: immobilisation and delivery.

A whole day of poor results across several operators points to group 1: temperature, pH, media or the incubator (pages 17 and 20). A single operator's results that differ from colleagues' point to technique, and the remedy is supervised practice, not blame.

How the laboratory measures it

The Vienna consensus on ART laboratory KPIs (2017) lists indicators for ICSI, including the normal fertilisation rate after ICSI and the ICSI damage rate, with competency and benchmark values. Your laboratory tracks these per operator over time (page 20). As a trainee you will be compared with the laboratory's own values, not with anyone outside it.

At the bench: your error log

1. Log every difficulty2. Name the group (1 to 5)3. Agree one correction4. Check that it worked
Figure: using your error log.
  1. After every practice or supervised session, write in your logbook (page 61) what you did, how many oocytes, and every difficulty.
  2. For each difficulty, name the group (1 to 5) and the likely cause.
  3. Agree one correction with your trainer before the next session.
  4. Note whether the correction worked.

Errors that put a patient's gametes at risk, such as a possible identity mix-up, are reported to the senior embryologist immediately, whatever the time of day. They are handled under the laboratory's incident procedure.

Common errors in learning

Key points

Check yourself

  1. Name the five groups of ICSI errors.

    Set-up and environment; tools; sperm; oocyte; records and process.

  2. Many oocytes degenerate after your injections. Which groups do you check first, and why?

    Group 2 (tools) and group 4 (oocyte): tool angle, suction or withdrawal are the usual causes of degeneration after injection.

  3. What should you do if you are not sure that exactly one sperm is in the pipette?

    Do not inject. Expel and start again.

  4. Which two Vienna consensus indicators relate directly to ICSI?

    The normal fertilisation rate after ICSI and the ICSI damage rate.

  5. From page 33: After ICSI, what does 3PN often mean?

    That the second polar body was not extruded (page 33).

  6. From page 32: How would you change your technique for a membrane that breaks immediately?

    Do not aspirate. Deliver the sperm with minimal fluid and withdraw slowly (page 32).

Contents and reading plan

Questions on this page

Will I be judged on my mistakes during training?

You are judged on whether you recognise, record and correct them under supervision. Hiding a mistake is the one error that is never acceptable.

What is the ICSI damage rate?

The share of injected oocytes that degenerate after injection. The Vienna consensus lists it as a laboratory indicator, and it is tracked per operator over time.

What is the first thing to check if a whole day's results are poor?

The environment: stage and incubator temperature, gas and pH, media and oil. A problem affecting every operator usually lies there rather than in one person's technique.

The Genesis ART Textbook is teaching text for trainees and doctors of the Genesis ART Training Academy. It is not treatment advice and not a laboratory standard operating procedure; every technique is learned under supervision. Page numbers never change.